JVC GR-D200 manual To Remove Protection, En %, To protect the currently displayed file, Card

			EN￿ %
Protecting Files		To protect the currently displayed file
		9 Press + or – to select
The Protect mode helps prevent the accidental		“CURRENT”, and press	MENU
		SELECT/SET. The	PROTECT CURRENT
erasure of files.			PROT . ALL
		PROTECT screen appears.	CANC . ALL
			RETURN
		10 Press REW (3) or FF
Power Switch
		(5) to select the desired
		file.
Lock Button		11 Press + or – to select	PROTECT
		“EXECUTE”, and press
Fast-Forward Button (FF (5))		SELECT/SET.
		● To cancel protection,	PROTECTED
Rewind Button		select “RETURN”.	RETURN
		● Repeat steps 10 and 11
(REW (3))
		for all files you want to
		protect.
		To protect all files stored in the memory
		card
		9 Press + or – to select “PROT.ALL”, and press
		SELECT/SET. The PROTECT screen appears.
		10 Press + or – to select “EXECUTE”, and press
		SELECT/SET.
VIDEO/MEMORY	+/- Button	● To cancel protection, select “RETURN”.
Switch		NOTES:
SELECT/SET Button	MENU Button	● If the “ ” mark appears, the currently displayed
1 Load a memory card. ( pg. 16)		file is protected.
		● When the memory card is initialized or corrupted,
2 Set the VIDEO/MEMORY Switch to “MEMORY”.		even protected files are deleted. If you do not want
3 Set the Power Switch to “PLAY” while pressing		to lose important files, transfer them to a PC and
		save them.
down the Lock Button located on the switch.
4 Open the LCD monitor fully, or pull out the		To Remove Protection
viewfinder fully.
● The type of file (IMAGE or E-MAIL CLIP) which		Before doing the following, perform steps 1 – 8 in
has been played back at the last time is		“Protecting Files” in the left column.
displayed.		To remove protection from the currently
If you want to select another type of file, go to		displayed file
step 5.		9 Press + or – to select “CURRENT”, and press
If not, go to step 7.
		SELECT/SET. The PROTECT screen appears.
5 Press SELECT/SET. The MEMORY SELECT screen
		10 Press REW (3) or FF (5) to select the
appears.		desired file.
6 Press + or – to select the desired type of file, and
		11 Press + or – to select “EXECUTE”, and press
press SELECT/SET.		SELECT/SET.
7 Press MENU. The Menu Screen appears.
		● To cancel selection, select “RETURN”.
8 Press + or – to select	PROTECT	● Repeat steps 10 and 11 for all files you want to
“PROTECT”, and press		remove protection.
	MENU
SELECT/SET. The Sub	DELETE
	DPOF
Menu appears.	NO . RESET
	FORMAT

D I SPLAY

END

RECORDING & PLAYBACK

DIGITAL STILL CAMERA (D.S.C.)

CONTINUED ON NEXT PAGE