JVC GR-D200 manual Blinks quickly Self-Timer shooting starts soon, Starts

""￿EN FEATURES FOR RECORDING (cont.)

Self-Timer

Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

●You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while self-recording with the viewfinder pushed back.

3	Set “SELF-TIMER” to
		MANUAL
	“ON ”. ( pg. 31, 36)	SEL F – T I MER – OF F
4		ON
	To engage the Self-Timer

for video recording, press

the Recording Start/Stop

Button.RETURN

NOTE:

If “BEEP” and “TALLY” are set to “OFF” ( pg. 37), the beep does not sound and the tally lamp does not light.

When the Recording Start/Stop Button or SNAPSHOT is pressed, the tally lamp changes as shown:

● After 15 seconds, the
beep sounds and video
recording starts.
5 To stop Self-Timer
recording, press the
Recording Start/Stop	Self-Timer indication
Button again.

●The camcorder re-enters Record-Standby mode.

OR

5Press SNAPSHOT.

●After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder re-enters Record-Standby mode.

6To end Self-Timer recording, select “OFF” in step 3.

Begins blinking (Self-Timer starts)

Blinks quickly (Self-Timer shooting starts soon)

Stops blinking and stays on (Self-Timer video recording

starts)

OR

Turns off (Self-Timer snapshot recording occurs)

After approx. 15 sec.