JVC GR-D200 manual Audio Dubbing, En#

EN￿#'

SEPIA: Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look.

STROBE: Your recording looks like a series of consecutive snapshots.

1)To start playback, press PLAY (U).

2)Press EFFECT. The PLAYBACK EFFECT Select Menu appears.

3)Press EFFECT repeatedly to move the highlight bar to the desired effect.

●The selected function is activated and after 2 seconds the menu disappears.

●To deactivate the selected effect, press EFFECT ON/OFF. To reactivate the selected effect press EFFECT ON/OFF again.

●To change the selected effect, repeat from step 2 above.

Audio Dubbing

The audio track can be customised only when recorded in the 12-bit and SP modes. ( pg. 34)

	Stereo Microphone
Speaker
	PAUSE
A.DUB	PLAY
	A.DUB
PLAY
	STOP
PAUSE
	T
STOP	W

RM-V717U (optional) RM-V718U (provided)

To hear the dubbed sound during playback… Set “12bit MODE” to “SOUND 2” or “MIX”. ( pg. 31, 40)

NOTES:

●Sound is not heard from the speaker during Audio Dubbing.

●When editing onto a tape that was recorded at

12-bit, the old and new soundtracks are recorded separately.

●If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas.

●If feedback or howling occurs during TV playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume.

●If you change from 12-bit to 16-bit in mid- recording and then use the tape for Audio Dubbing, it is not effective from the point where 16-bit recording began.

●During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in 16-bit audio or a blank portion, Audio Dubbing stops.

●To perform Audio Dubbing while watching on the television, make connections. ( pg. 22)

●To perform Audio Dubbing with a video unit connected to the camcorder’s S/AV connector, first set “S/AV INPUT” to “A/V. IN” or “S. IN” in VIDEO Menu. ( pg. 31, 40)

The “AUX” indication appears instead of “MIC”.

ADVANCED FEATURES

1

2

3

4

Play back the tape to locate the point where editing will start, then press PAUSE (9).

While holding A. DUB (D) on the remote control, press PAUSE (9). The “9D” and “MIC” indicators appear.

Press PLAY (U), then begin “narrating”. Speak into the microphone.

●To pause dubbing, press PAUSE (9).

To end Audio Dubbing, press PAUSE (9), then

STOP (8).