![](/images/new-backgrounds/1292302/29230295x1.webp)
"&EN | FEATURES FOR RECORDING (cont.) |
![](/images/new-backgrounds/1292302/29230295xi2.webp)
NAVIGATION Function
The Navigation Function helps you check tape contents by making thumbnail images on a memory card.
Power Switch
Lock Button
Rewind Button (REW (3))
|
|
|
|
|
| +/- Button |
|
|
|
|
|
| |
|
|
|
|
|
| |
VIDEO/MEMORY |
|
| ||||
Switch |
|
|
| |||
NAVI STORE Button |
|
|
| SELECT/SET Button | ||
| ||||||
NAVI Button |
|
|
|
| ||
|
|
|
|
To make thumbnail images during video recording automatically
1Load a cassette. ( pg. 15)
2Load a memory card. ( pg. 16)
3Set the VIDEO/MEMORY Switch to “VIDEO”.
4Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
5Set “NAVIGATION” to the desired navigation storing time. ( pg. 31, 35)
●If the “” indicator appears blinking on the screen, wait until it stops blinking. If it does not stop blinking after a while, check if a memory card is loaded.
6Press the Recording Start/Stop Button to start recording.
● When the recording time is over the navigation time set in step 5, “ ” appears briefly, then the image of the point where recording is started is captured and stored in the memory card as a thumbnail image.
●If the Recording Start/ Stop button is pressed
before “” stops blinking, the image of the
point where the loaded memory card is recognised is captured.
7Press the Recording Start/Stop Button to stop recording.
To make thumbnail images after video recording
manually...
1)Perform steps 1 to 4 above.
2)Set “NAVIGATION” to “MANUAL”. ( pg. 31, 35)
3)After the recording, press NAVI STORE.
•The “ ” indicator appears briefly and the captured image is stored in the memory card as a thumbnail image.
NOTES:
●The remaining number of storable thumbnail images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “ /
” in DSC Menu, the number shows how many 640 x 480 pixel images can be stored.
●If “5S” is set to “5S” or “Anim.” in MANUAL Menu, the NAVIGATION function will not work properly.
To find scenes on tape using thumbnail images (NAVIGATION Search)
1Load a cassette. ( pg. 15)
2Load a memory card. ( pg. 16)
3Set the VIDEO/MEMORY switch to “VIDEO”.
4Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
5Press NAVI during video playback or stop mode.
● The loaded cassette’s |
| NAV I GAT I ON | ||
NAVIGATION thumbnail | DATE : MAY 2 4 | ’ 0 3 | 3 :: 2 9 AM | |
image screen appears. | TC | : 1 3 : 2 3 | : 1 5 |
|
1 | 2 |
| 3 | |
● Press REW (3) to | 4 | 5 |
| 006 |
display the previous |
| |||
|
|
|
| |
page. Press FF (5) to |
|
|
|
|
display the next page. |
|
|
|
|
6Press + or – to select the desired image, and press