Klipsch RF-10 specifications Dual 4.5 Two-WayFloorstanding Loudspeaker

Dual 4.5'' Two-Way Floorstanding Loudspeaker

RF-10

As the smallest floorstanding loudspeaker in Klipsch’s award-winning Reference Series line, the RF-10 delivers high-performance Reference sound at a lower price point. Despite its entry-level status, this loudspeaker utilizes the same advanced technologies and world-class materials used in the larger Reference III floorstanders.

The RF-10 employs dual 4.5-inch woofers and a 1-inch titanium-dome compression driver loaded with a 5-inch square Tractrix® Horn. The woofers on the RF-10 still feature Klipsch’s distinctive, copper-colored Cerametallic™ cones. Made with an anodized aluminum, these cones are strong with low mass. The anodizing process converts their inner and outer surfaces to ceramic. The outcome is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer’s operating range.

As in all Reference Series speakers, the RF-10 crossover network is constructed using extremely high-quality components including top-of-the-line internal wiring, polyester film- type capacitors and an air-core inductor to ensure signal purity and proper driver integration.

Available in a black ash vinyl finish, the RF-10 features a low-diffraction sculpted baffle and magnetically attached grille for an elegant fit and finish.

■Magnetically shielded to prevent video interference

■Bi-wire compatible inputs

■Tractrix Horn titanium dome compression driver tweeter for clean, detailed highs

■Cerametallic cone woofers

■High sensitivity and power handling

S P E C I F I C A T I O N S

BANDWIDTH	59Hz-20kHz ± 3dB
SENSITIVITY	95dB @ 2.83 volts/1 meter
NOMINAL IMPEDANCE	8 ohms compatible
CROSSOVER FREQUENCY	2280Hz
POWER HANDLING	75 watts (300 watts peak)
ENCLOSURE TYPE	Bass-reflex via rear-firing port
DRIVE COMPONENTS	Two way system using one 1'' (2.5cm)
	magnetically shielded, titanium dome
	compression driver with an integral 5''
	(12.7cm) square 90˚x 60˚ Tractrix Horn and
	two 4.5'' (11.4cm) magnetically shielded,
	Cerametallic cone woofers
WEIGHT	35 lbs. (15.9kg)
HEIGHT	34" (86.4cm)
WIDTH	6.8" (17.3cm) (w/o feet)
DEPTH	10'' (25.4cm)
FINISH	Black Ash woodgrain vinyl

*All dimensions include grille, binding posts, and feet

www.klipsch.com 1-800-KLIPSCH

All specifications are subject to change without notice. ©2004