JVC GR-D200 Using AC Power, Information, Benefits Of Lithium-Ion Batteries, For other notes,  pg

EN￿￿￿

NOTES: About Batteries

●Recording time is reduced significantly under the following conditions:

• Zoom or Record-Standby mode is engaged repeatedly.

• The LCD monitor is used repeatedly.

• The playback mode is engaged repeatedly.

● Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

Lithium-ion is vulnerable in colder temperatures.

INFORMATION:
The optional extended-use battery pack kit is a set		DANGER! Do not attempt to take the batteries apart,
composed of a battery pack and AC Power Adapter/
		or expose them to flame or excessive heat, as it may
Charger:
		cause a fire or explosion.
VU-V840 KIT: BN-V840U battery pack & AA-V15U
		WARNING! Do not allow the battery or its terminals
AC Power Adapter/Charger
		to come in contact with metals, as this can result in
VU-V856 KIT: BN-V856U battery pack & AA-V80U
		a short circuit and possibly start a fire.
AC Power Adapter/Charger
		The Benefits Of Lithium-Ion Batteries
Read the kit’s instruction manual before using.
Also, by using the optional JVC VC-VBN856U DC		Lithium-ion battery packs are small but have a large
Cord, it will be possible to connect BN-V840U or		power capacity. However, when one is exposed to
BN-V856U battery packs to the camcorder and		cold temperatures (below 10°C/50°F), its usage time
supply power directly to the camcorder.		becomes shorter and it may cease to function. If this
		happens, place the battery pack in your pocket or
Using AC Power		other warm, protected place for a short time, then
		re-attach it to the camcorder. As long as the battery
		pack itself is not cold, it should not affect
		performance.
		(If you’re using a heating pad, make sure the battery
		pack does not come in direct contact with it.)
		For other notes,  pg. 68.
AC Adapter
To AC outlet	To DC connector
	a
b

GETTING STARTED

1Connect the AC Adapter to the camcorder a.

2Plug the AC Adapter into an AC outlet b.

NOTES:

●The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.

●For other notes,  pg. 68.