![](/images/new-backgrounds/1292302/29230243x1.webp)
EN | VIDEO PLAYBACK (cont.) |
![](/images/new-backgrounds/1292302/29230243xi2.webp)
Connections To A TV Or VCR
These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.
To S/AV | S/AV/Editing cable | |
(provided) | ||
|
A B
C
D
E
VCR
ANot connected
TV | B Black to |
C Yellow to VIDEO IN** | |
| D White to AUDIO L IN*** |
ERed to AUDIO R IN***
*Connect when your TV/VCR has
**Connect when your TV/VCR has only A/V input connectors.
***Not required for watching still images only.
1Make sure all units are turned off.
2Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4Turn on the camcorder, the VCR and the TV.
5Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV…
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 31, 41)
Or, press DISPLAY on the remote control to turn on/off the date indication.
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 31, 41)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 31, 41)
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack.
( pg. 11)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●When a cable is connected to the S/AV connector, sound cannot be heard from the speaker.