!EN | D.S.C. PLAYBACK (cont.) |
To Print By Selecting Still Images And Number Of Prints
1Perform steps 1 – 8 in “To Print All Still Images (One Print For Each)” ( pg. 29).
2Press + or – to select
“CURRENT”, and press | DPOF |
| |
SELECT/SET. The DPOF |
|
screen appears. | SHEETS |
3 Press REW (3) or FF | 0 0 |
RETURN | |
(5) to select the desired |
|
file. |
|
4 Press + or – to select the number indication (00), |
Initializing A Memory Card
You can initialize a memory card anytime. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared.
1Set the VIDEO/MEMORY Switch to “MEMORY”.
2Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
3Open the LCD monitor fully, or pull out the viewfinder fully.
4Press MENU. The Menu
and press SELECT/SET. |
5 |
Screen appears.PROTECT
DELETE
DPOF
MENU
Select the number of prints |
by pressing + to increase number, or – to decrease the number, and press
SELECT/SET.
●Repeat steps 3 through 5 for the desired number of prints.
●The number of prints can be set up to 15.
●To correct the number of prints, select the image again and change the number.
NO . RESET
FORMAT
D I SPLAY
END
5 Press + or – to select “FORMAT”, and press SELECT/SET. The FORMAT screen appears.
6 Press + or – to select “EXECUTE”, and press SELECT/SET. The memory
6Press + or – to select
“RETURN”, and press SELECT/SET. The “SAVE?”
DPOF
card is initialized.
● When initialization is finished, “NO IMAGES |
STORED” or “NO |
appears. |
appears.SAVE?
● If you did not change |
| |
EXECUTE | ||
CANCEL | ||
any settings in step 3 | ||
| ||
through 5, the Menu |
| |
Screen reappears. |
|
7Press + or – to select “EXECUTE” to save the setting you have just made, and press SELECT/ SET.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1Perform steps 1 – 8 in “To Print All Still Images (One Print For Each)” ( pg. 29).
2Press + or – to select “RESET”, and press SELECT/ SET. The DPOF screen appears.
3Press + or – to select “EXECUTE”, and press SELECT/SET. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
● To cancel initialization, select “RETURN”. |
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted initialize it.
