JVC GR-D200 manual $EN How To Attach The Core Filter, Stopper

$￿EN

How To Attach The Core Filter

Attach the core filter(s) to the provided AC Adapter’s cord, S-Video/Audio/Video/Editing cable and USB cable. The core filter reduces interference.

1Release the stoppers on both ends of the core filter.

Stopper

2Run the cable through the core filter, leaving approx. 3 cm (1-3/16") of cable between the cable plug and the core filter. If using the AC Adapter’s cord or USB cable, be sure to wind the cable once around the outside of the core filter as shown in the illustration.

● Wind the cable so that it is not slack.

3Close the core filter until it clicks shut.

NOTES:

●Take care not to damage the cable.

●When connecting cables, attach the end with the core filter to the camcorder.

For the AC Adapter’s cord and USB cable

3 cm (1-3/16")

Wind once

For the S-Video/Audio/Video/Editing cable

3 cm (1-3/16")