![](/images/new-backgrounds/1292302/29230273x1.webp)
Wide mode
WIDE MODE |
OFF: Records with no change in the screen ratio. For playback on a TV with a normal screen ratio.
CINEMA*
: Inserts black bands at the top and
bottom of the screen. The indicator appears. During playback on
SQUEEZE* : For playback on TVs with an aspect ratio of 16:9. Naturally expands the image to fit the screen without distortion. The
indicator appears. When using this mode, refer to your
D.WIDE* : The
indicator appears. The zoom range is extended beyond the maximum optical zoom wide angle range. This mode’s wide angle setting is equivalent to using a 0.7X wide conversion lens. Zooming is possible from 0.7X to a magnification set in CAMERA Menu. This mode is suitable for shooting in a small room.
*Available only when the VIDEO/MEMORY Switch is set to “VIDEO”.
Wind cut
WIND CUT |
OFF: Disengages the function.
ON : Helps cut down on noise created by wind. The “
” indicator appears. The quality of the sound will change. This is normal.
Snapshot flash
FLASH | |
OFF: Will not fire. |
|
AUTO: Fires automatically if it is dark ( appears).
AUTO C: Fires automatically if it is dark ( appears) and reduces the
ON: Always fires.
For details, refer to “Snapshot Flash” ( pg. 43).
EN!%
![](/images/new-backgrounds/1292302/29230273xi27.webp)
System Menu
SYSTEM
Beep, melody and shutter sound
BEEP |
OFF: Even though not heard while shooting, shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. It also activates the shutter sound effect. ( pg. 23, 42)
MELODY: Instead of a beep, a melody sounds when any operation is performed. It also activates the shutter sound effect. ( pg. 23, 42)
Tally lamp setting
TALLY |
| ||
OFF: The tally lamp remains off at all times. |
| ||
ON: The tally lamp comes on to signal the start of | FEATURES | ||
recording. |
| ||
For details, refer to “USING THE REMOTE | |||
Remote control setting |
|
| |
CONTROL UNIT” ( pg. 56). |
| ADVANCED | |
REMOTE | |||
|
OFF: Disables the remote control operations.
ON: Enables the remote control operations.
Flash brightness adjustment
FLASH ADJ.(Factory-preset: ±0) For details, refer to “Flash Brightness Adjustment” ( pg. 43).
CONTINUED ON NEXT PAGE