01Before you start
Locking the remote control2 Remove the battery cover.
This receiver has a remote control lock feature that makes the remote control touch screen and hard keys inoperative.
1 At the same time, press the and hard keys for about three seconds.
• This is not possible from the remote setup screen.
CHANNEL | ENTER |
VOLUME | |
MENU | MUTE |
SYSTEM |
|
SETUP |
|
RECEIVER
LOCKED! shows on the touch screen to indicate the remote control is locked.
2To unlock the remote control, repeat step 1. Once the remote control is unlocked, the touch screen shows the Home menu.
Restarting the remote control
If the remote control display freezes during operation (none of the buttons seem to work), you may need to restart the unit.
Important
•Doing this will not erase any of your personalized settings or presets except for the clock setting.
1Use a small phillips screwdriver to remove the screw fixing the battery cover to the back of the remote.
3Use a pen or other sharp instrument to press the reset button located in the hole to the right (above the battery).
After restarting the remote control, the touch screen shows the Home menu.
Replacing the lithium-ion batteries
If you notice that the remote will no longer hold a charge, you may need to replace the
Caution
•The
•Replacement cells must be of type AZW7264, manufactured by NEC TOKIN Corporation. Use of any other battery cells may result in fire or explosion. Contact the Pioneer Customer Support division to obtain new batteries. Replacement cells are not covered under warranty.
•Dispose of used battery cells immediately after replacement. Keep away from children.
•When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country or area.
12
En
