Pioneer VSX-59TXi Setting the button alert volume, Setting the time-out setting

Before you start 01

Setting the button alert volume

You can set the volume of the ‘beep’ you hear when you press a button on the remote.

•Press BEEP to select a setting.

Each press selects between quiet, loud or off. The current setting is shown on the touch screen.

SETUP 2/3

CLOCK DISPLAY : AM/PM

CLOCK SETTING

BEEP :

TIMEOUT

KEY LABEL

Setting the time-out setting

• Default setting: 60sec

To save battery life, a timer automatically switches off the remote control off after a set amount of time if no commands are entered. You can adjust separate time- out settings for the LCD, and the remote backlight.

1 Press TIMEOUT.

3Press ENTER when you’re finished. You’ll return to the remote setup menu.

Resetting the remote control

Use this feature to reset the remote control settings to the factory defaults.

Important

• Doing this will erase any of your personalized settings.

1 Press RESET TO DEFAULT.

SETUP 3/3

RESET TO DEFAULT

2Confirm by pressing YES after reading each screen.

SETUP 2/3

CLOCK DISPLAY : AM/PM

CLOCK SETTING

BEEP :

TIMEOUT

KEY LABEL

RESET

Do you want to reset

the REMOTE to the DEFAULT settings ?

YES

NO

RESET

ALL settings you made

will be ERASED.

Is it all right?

YES

NO

2Use the + and – buttons to set the LCD TIMEOUT and BACKLIGHT TIMEOUT settings.

You can adjust these from 20–120 seconds.

•The backlight timeout can’t be longer than the LCD timeout setting.

TIMEOUT

LCD TIME OUT

-	60 sec	+
BACKLIGHT TIME OUT
-	60 sec	+

ENTER CANCEL

After the screen goes blank, the Home menu appears within a minute or so, and the remote control will be reset to the default settings.

11

En