Pioneer VSX-59TXi operating instructions Volt Trigger, Multi-RoomSetting, Advanced setup

Advanced setup 11

3When you're finished, select RETURN and press

ENTER.

You will return to the Expert Setup menu.

12 Volt Trigger

• Default setting: OFF · OFF (all components)

After connecting a component to one of the 12 volt triggers (see Switching components on and off using the 12 volt trigger on page 74), it switches on automatically when you select an input function set to switch the trigger on. Specify which input functions switch on which trigger(s) below.

1Select ‘12 Volt Trigger’ from the Expert Setup menu.

2Select an input function and choose the setting that you want.

This should be the input function, that when selected, switches on one (or both) of the 12 volt triggers.

3.6. 12V Trigger					3.6. 12V Trigger
	1		2			1		2
DVD/LD	[	OFF.OFF		]	DVD/LD	[	ON .OFF		]
TV/DVD		[OFF.OFF]			TV/DVD		[OFF.OFF]
SAT	[OFF.OFF]				SAT	[OFF.OFF]
VIDEO	[OFF.OFF]				VIDEO	[OFF.OFF]
DVR/VCR1	[OFF.OFF]				DVR/VCR1	[OFF.OFF]
VCR2	[OFF.OFF]				VCR2	[OFF.OFF]
VCR3	[OFF.OFF]				VCR3	[OFF.OFF]
( Next)					( Next)

•OFF · OFF – 12 volt triggers 1 and 2 are switched off.

•OFF · ON – 12 volt trigger 1 is switched off; 12 volt trigger 2 is switched on.

•ON · OFF – 12 volt trigger 1 is switched on; 12 volt trigger 2 is switched off.

•ON · ON – 12 volt triggers 1 and 2 are switched on.

3Repeat for as many input functions as you would like to set.

4When you're finished, select RETURN and press

ENTER.

You will return to the Expert Setup menu.

Multi-Room Setting

• Default setting: VARIABLE / PIONEER

If you’ve made multi-room connections (see Multi-room setup on page 83) you may need to specify your volume setting and IR receiver type.

1 Select ‘Multi-Room Setting’ then press ENTER.

3.Expert Setup

[1. OSD Adjustment ]

[2. Bass Peak Level ]

[3. D-Range Control ]

[4. Function Rename ]

[5. OSD Overlay ]

[6. 12V Trigger ]

[7. Multi-Room Setting ] [Return]

2Select the volume level setting.

•VARIABLE – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.

•FIXED – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls.

3.7. Multi-Room Setting

Volume Level

[VARIABLE] IR Receiver

[PIONEER ]

[Return]

CAUTION: If the "FIXED" position is chosen,the volume will be loud.

With the FIXED setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub room at first and then experiment to find the correct level.

3Select the type of IR receiver you’re using.

•PIONEER – Use this setting if you’re using a Pioneer MR-100 (or if the IR receiver you’re using doesn’t seem to work after selecting others).

•OTHERS – Use this setting for all other IR receivers.

3.7. Multi-Room Setting

Volume Level

[VARIABLE]

IR Receiver

[ OTHERS ]

[Return]

CAUTION: If the "FIXED" position is chosen,the volume will be loud.

4Select ‘Return’ then press ENTER to finish. You will return to the Expert Setup menu.

Note

•Some IR receivers may not work with this receiver. Check with your audio dealer for more information.

95

En