Operating Instructions
Note
•Click [Delete Buffered Images] to delete images already buffered.
•Click [Save] to save the settings. The buffered images will be deleted.
•Clicking [Cancel] takes you back to the Trigger page without saving changes.
Setting |
| Description |
|
|
|
Enable Image | • | Check the box to enable the Trigger setting. Uncheck the |
Buffer/Transfer |
| box to disable it. |
|
|
|
Trigger | • | Selecting [Timer] enables the camera to buffer/transfer |
|
| images during the specified date and time by timer. |
•Selecting [Motion Detection] enables the camera to buffer/ transfer images when the motion is detected during the specified date and time.
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer buffer/transfer (see page 49).
•Clicking [<Back] takes you back to the previous page.
•Clicking [Cancel] takes you back to the Trigger page without saving changes.
Setting |
| Description |
|
|
|
Day of the week | • | Check the box to enable the day. Uncheck the box to |
|
| disable it. |
|
|
|
Active Time of | • | To set a trigger time, check the time option and set a time |
Trigger |
| period. Check [Always] if you are not specifying a time |
|
| period. |
|
|
|
72
