![](/images/new-backgrounds/1242352/242352209x1.webp)
Operating Instructions
6.1.7Loading Settings from a Configuration File
Camera settings can be loaded from a configuration file. If you reset the camera to factory default, the camera can load previously used settings from a configuration file.
Note
•The configuration file also saves network settings. When settings are loaded, the network settings are also loaded.
•If you try to update the camera, create a configuration file after updating the firmware. If there is a firmware version difference between the camera that you create a configuration file from and the camera that you try to load settings to, the settings may not have been loaded to the camera.
1.Click [Load Settings] on the Maintenance page.
2.Click [Browse...].
3.Select the configuration file on the Choose file dialog box, and click [Open].
•The file name is displayed in the data field.
4.Confirm the file name, and click [Load].
5.Click [Restart].
•The camera restarts, and the Top page is displayed.
105