Panasonic BL-C1 operating instructions Authentication

		Operating Instructions
	Setting	Description
Host Name		• If your ISP uses the DHCP function, which automatically
(DHCP Only)		assigns an IP address to the camera, enter the ISP-
		assigned host name. (The host name may be used as an
		authentication.)
		• Enter ASCII characters for the host name (see page 131).
		Note that [Space], ["], ['], [&], [<] and [>] are not available.
Default Gateway*1		• If you have been assigned a Default Gateway address by
(Static/DHCP Only)		your ISP or network administrator, enter it in this data field.
		• Set 4 numbers (0—255) and 3 periods, such as
		"192.168.0.253". Note that "0.0.0.0" and
		"255.255.255.255" are not available.
DNS Server		• The DNS server address is required in the following situations:
Address*1		– Transferring camera images by E-mail or FTP
(Static/DHCP Only)		– Setting cameras by their host names on the Multi-
		Camera Setup page
		– Using the DynamicDNS service
		– Using the sensor log notification
		• If you have been assigned a DNS server addresses by
		your ISP or network administrator, enter them in this data
		field. There are usually two addresses.
		• Set 4 numbers (0—255) and 3 periods, such as "192.168.0.253".
		Note that "0.0.0.0" and "255.255.255.255" are not available.
Max. Bandwidth		• The bandwidth can be restricted.
Usage		• Select a maximum bandwidth from [Unlimited] to [0.1 Mbps].
		Note
		Set a maximum bandwidth referring to the following file
		sizes. These are examples for a JPEG file of standard
		image quality. File sizes may change depending on the
		image quality or the brightness of the object.
		160 × 120 pixels: About 3 KB (24 Kbit)
		320 × 240 pixels: About 10 KB (80 Kbit)
		640 × 480 pixels: About 18 KB (144 Kbit)
Connection Type		• Select [Auto Negotiation] normally. If the camera cannot be
		accessed, see page 7 of Troubleshooting on the CD-ROM.
*1	If the IP address is automatically obtained from a DHCP server, this field does not need to be
	set.

39