
Operating Instructions
•When the camera transmits a dark scene, the camera image may become white, or horizontal lines may be displayed on the screen. This is one of the characteristics of a CMOS sensor. This is not a malfunction.
•To display the Single Camera page directly, add it to the [Favorites] on the web browser.
•To view dark images, select [Enable] (default) at Color Night View on the Camera Setup page. The image will be brighter, but the refresh interval may increase and image quality may decrease in a dark place. (See page 51)
•If ActiveX® Controls (see page 19 or page 20) cannot be installed, download them from the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/
Error messages and screen color
When general or guest users access the Single Camera page outside the Operation Time, or when over 20 (the maximum number) users access the page simultaneously, a gray screen and error messages will be displayed on the page.
| An error message |
| is displayed. |
|
|
Error Message | Cause and Remedy |
|
|
The operation time | When general or guest users access the Single Camera |
has ended. | page outside the Operation Time, a gray screen will be |
| displayed. Clicking [Refresh] on the web browser displays |
| an error message. Consult your administrator about the |
| Operation Time. |
|
|
The maximum | When [Motion] is selected for the Refresh Interval, up to 20 |
number of accesses | users can access the camera simultaneously. For the 21st |
has been | user, a gray screen and an error message will be displayed |
exceeded. | on the Single Camera and Buffered Image pages. Wait for |
| a moment, and click [Refresh] on the web browser, or |
| change the value for the Refresh Interval. |
|
|
18