Operating Instructions
4.3Buffering or Transferring Images by Motion Detection Signal
The Trigger page allows you to enable image buffer/transfer by
Note
•The level of motion detection depends on resolution, image quality, and the object being viewed. Check the level by performing motion detection recording. (See page 84)
•Enabling Motion Detection delays the frame rate of the camera.
•A change to light or wind conditions may detect motions accidentally.
•Motion Detection may not work in dark areas.
•Objects moving fast may not be detected.
1.Click [Trigger] on the Setup page.
2.Click a No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Motion Detection] for the trigger, and click [Next>].
71
