Operating Instructions
10.Click [Go to Trigger page].
•The Trigger page is displayed.
Note
•If you set a short interval when transferring to a mobile phone, many E- mails will be sent, which may lead to a large phone bill. Therefore, we recommend you to set a long interval. 1 image per minute frequency is recommended.
•Motion Detection transfer stops operating until after the camera finishes all transfers. For example, if the camera transfers 3 images per minute and 6 images in total by setting 1 minute for motion deactivation time, the sensor will follow the pattern below.
120 seconds1 minute
1st 2nd 3rd 4th 5th 6th
Motion
deactivation time
Detectable
Undetectable |
| Undetectable Detectable | |||
|
|
|
|
|
|
A Motion Detection signal is detected.
•If you are buffering images to the internal memory, the following operations also delete all buffered images.
–Turning off the camera.
–Saving the Date and Time page.
–Restarting, updating firmware or resetting the camera to factory default.
83
