Operating Instructions
3.Click [Save] when finished.
•The new settings are saved.
•When finished, "Success!" is displayed.
4.Click [Go to UPnP page].
•The UPnP page is displayed.
2.3.1Connecting the Camera to a Router that Supports UPnP™
To allow access from the Internet with a router supporting UPnPTM, follow the procedures shown in Getting Started.
Note
•On some routers, the UPnPTM feature is disabled by default. Enable your router's UPnPTM feature following the router manual before you set up the camera. See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for details.
•If a maximum idle time is set in PPPoE or PPTP connection with your ISP, disable it on the router. See the router manual for details.
41
