![](/images/new-backgrounds/1242352/242352211x1.webp)
Operating Instructions
6.1.8Resetting the Camera to Factory Default
All camera settings are reset to factory default when the Execute button is clicked.
1.Click [Reset to Factory Default] on the Maintenance page.
2.Click [Execute].
•The indicator blinks orange, and then turns off for 5 seconds.
•All camera settings (user name, password, IP address, subnet mask, etc.) are reset to factory default.
•If the camera is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure the camera referring to Getting Started.
Note
•Do not turn off the camera during the reset operation.
•The internal clock will not be reset, but the time format will return to AM/ PM mode (see page 49).
•See page
•Pressing the FACTORY DEFAULT RESET button resets the camera to factory default (see page 109).
•All buffered images on the internal memory are deleted when resetting the camera to factory default.
•The reset operation takes about 1 minute.
•If the camera is restarted, all sensor logs are deleted.
106