Panasonic BL-C1 operating instructions Configuring Multiple Cameras

Operating Instructions

5.2Configuring Multiple Cameras

The Multi-Camera Setup page allows you to configure camera IP addresses and camera names to view multiple images on the Multi-Camera page. These configurations are required to use the Multi-Camera page. Up to 12 cameras can be configured. The Selfcamera is registered at No. 1 by default.

1.Click [Multi-Camera] on the Setup page.

2.Click Add.

Note

•If you click the camera number, the modification page is displayed. Camera settings can be modified or deleted here.

•If you configured multiple cameras, you can change the camera number. Select the number, and click [Move].

3.Set each parameter.

•Clicking [Cancel] cancels your settings without saving changes.

•By clicking [Clicking this link, enters this camera's settings.], the settings of the Selfcamera are entered automatically. "selfcamera" is displayed for the IP Address or Host Name, "--" is displayed for the Port No., and the model no. is displayed for the Camera Name.

93