Operating Instructions
Camera Feature Locations
Front View
Indicator
The indicator color shows camera status. (See page 97)
Lens (Focus: 0.3
Indicator Display*1
Power | Not on LAN |
|
|
| Orange |
|
| Orange blinking |
| ||||||||||
|
|
| |||||||||||||||||
on | On LAN | Orange |
| Orange blinking |
|
|
| Green blinking |
|
| Green | ||||||||
|
|
|
| ||||||||||||||||
Normal Operation*2 |
|
|
|
|
|
|
|
| Green |
|
|
|
| ||||||
Automatic | Setting |
|
|
|
|
| Green blinking |
| |||||||||||
Setup | Finished setting |
|
|
|
|
|
|
|
| Green |
|
|
|
| |||||
Using | Getting IP address*3 |
|
| Orange blinking |
|
| Green blinking |
| |||||||||||
|
|
|
| ||||||||||||||||
DHCP | Got IP address |
|
|
|
|
|
|
|
| Green |
|
|
|
| |||||
Updating Firmware |
|
|
|
|
| Orange blinking |
| ||||||||||||
FACTORY DEFAULT RESET | Orange blinking |
|
| Turning off (about 5 seconds) | |||||||||||||||
| |||||||||||||||||||
|
|
|
| The status when turned on |
| ||||||||||||||
button pressed |
|
|
|
|
| ||||||||||||||
(The camera is reset to factory default status after 1 minute.) | |||||||||||||||||||
|
| ||||||||||||||||||
UPnPTM Failure | Orange blinking (About a |
| |||||||||||||||||
Internal Failure |
|
|
|
|
| Red blinking*4 |
| ||||||||||||
*1 The information below varies depending on the indicator settings (see page 97). *2 The indicator turns orange if the camera is not connected to the LAN.
*3 The indicator blinks orange if the camera is not connected to the LAN. *4 See page 4 of Troubleshooting on the
10
