|
| Operating Instructions |
|
|
|
| Setting | Description |
|
|
|
| Motion | • Set the length of time during which the Motion Detection |
| deactivation | cannot be triggered after saving images temporarily or |
| time | transmitting them. This function is recommended to |
|
| prevent sending too many |
|
| • After detecting motions, the camera does not detect |
|
| motions during motion deactivation time, so some images |
|
| may not be captured. |
|
| Note |
|
| The internal memory cannot buffer images during motion |
|
| deactivation time. Because of this, images taken before |
|
| detection are not saved in internal memory, and so cannot |
|
| be received. Depending on the settings for image buffer/ |
|
| transfer, even if it is set to, for example, take "1 image per |
|
| second, and store 10 images, before detection", since the |
|
| images are not stored in internal memory, if the Motion |
|
| Detection detects something directly after the end of |
|
| motion deactivation time, the images may not be saved. |
|
| Ten seconds after the end of motion deactivation time, |
|
| images can be received as specified in the settings (see |
|
| page 83). |
|
|
|
75
