Operating Instructions
2.3Using UPnP™ (Universal Plug and Play)
UPnPTM can automatically configure your router to make it accessible from the Internet. In order to use this feature, your router needs to support UPnPTM, and it must be enabled. UPnPTM is disabled on most routers by default. See http:// panasonic.co.jp/pcc/products/en/netwkcam/ and your router's manual for details of how to enable UPnPTM. After UPnPTM is enabled on the router, set [Enable] for auto port forwarding.
1.Click [UPnP] on the Setup page.
2.Set up UPnP.
Setting | Description |
|
|
Auto Port | • If the network setting is [Static] or [DHCP], enabling auto |
Forwarding | port forwarding allows you to access the camera from the |
| Internet. |
| Note |
| If the network setting is [Automatic Setup], also enable |
| [Allow Access from the Internet] on the Network page (see |
| page 38). |
|
|
Display Shortcut | • Enabling this creates a shortcut to the camera in the My |
Icon in My | Network Places folder. |
Network Places | Note |
| |
| To enable this feature when using Windows XP or |
| Windows Me, enable the UPnPTM Windows component |
| beforehand (see page 130). |
40
