Panasonic BL-C1 operating instructions Setting Description

Operating Instructions

Setting	Description
Display	• Check this box to enable the camera.
IP Address*1 or	• Set an IP address or host name to enable the camera.
Host Name*2
Port No.	• Set a port number (1—65535).
Camera Name*3	• This camera name is displayed only on the Multi-Camera
	page.

*1

*2

*3

Set 4 numbers (0—255) and 3 periods, such as "192.168.0.253". Note that "0.0.0.0" and "255.255.255.255" are not available.

Enter ASCII characters for the host name (see page 131). Note that [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<] and [>] are not available.

Enter 1—255 characters.

You can enter ASCII characters (see page 131) or characters from other languages (1—15 characters for a 1-byte character and 1—7 characters for a 2-byte character). Note that [Space], ["], ['], [#], [&], [%], [=], [+], [?], [:], [<], and [>] are not available.

Note

•If your camera will only be accessed on your local network, use each camera's local IP address and port number.

•If you intend to access your camera from the Internet, you must use each camera's host name (global IP address) and the port number.

4.Click [Save] when finished.

•The new settings are saved.

•The Multi-Camera Setup page is displayed.

94