Operating Instructions
6.Set the image buffer frequency and the Motion deactivation time, and click [Next>].
Note
Due to the network environment, object and the number of simultaneous accesses, the camera may not record the number of images that you set. In this case, set the image buffer frequency longer.
•Clicking [<Back] takes you back to the previous page.
•Clicking [Cancel] takes you back to the Trigger page without saving changes.
Setting | Description |
|
|
Enable Pre- | • Check the box to enable the setting. The camera buffers or |
trigger Image | transfers the image right before the motion detection signal |
Buffer | is detected. |
| • Set an interval, number of images to buffer and total |
| number (see page 132). The number of buffered images |
| may not match the total number due to memory capacity, |
| image resolution, image quality or what object you view. |
|
|
Enable Post- | • Check the box to enable the setting. The camera buffers or |
trigger Image | transfers the image right after the motion detection signal |
Buffer | is detected. |
| • Set an interval, number of images to buffer and total |
| number (see page 132). The number of buffered images |
| may not match the total number due to memory capacity, |
| image resolution, image quality or what object you view. |
|
|
74
