01Before you start
There are three remote setup menu screens, which can be navigated by using the touch panel (cursor left/right) soft keys:
Setting the clock
The remote control features a clock that shows both 12 and 24 hour formats.
SETUP 1/3
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION
SETUP 2/3
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP : 
TIMEOUT
KEY LABEL
1Press CLOCK DISPLAY to select either AM/PM or 24H display format.
Each press switches between the two settings. The current display format is shown after CLOCK DISPLAY.
SETUP 2/3
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP : 
•For more on navigating the remote control menu screens, see Basic remote control displays on page 33.
Calibrating the remote control screen
This will make sure the remote control responds correctly when you touch it.
TIMEOUT
KEY LABEL
2 Press CLOCK SETTING to set the date.
Use the + and – buttons to set the year, month and day.
1 Press CALIBRATE.
SETUP 1/3
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION
SETUP 2/3
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP : 
TIMEOUT
KEY LABEL
DATE 1/2
+ + +
2003 /10 /09
- - -
NEXT CANCEL
2Press the center of each cross point to align the touch screen with the LCD panel underneath.
This adjustment will make sure your remote control is calibrated correctly.
PLEASE TOUCH
THE UPPER "+" MARK
"MUTE": CANCEL
When you've touched both cross points, PLEASE WAIT is displayed and you’ll return to the remote setup menu when calibration is finished.
10
3Press NEXT to continue and set the time. Use the + and – buttons to set the hour and minute.
TIME 2/2
+ +
17 : 08
- -
ENTER CANCEL
4Press ENTER when you’re finished. You’ll return to the remote setup menu.
En
