LT-82 Setup and Operating Instructions

5Connect LT-82 Power to Radiator(s)(if desired)

The radiator(s) can be powered by either the transmitter Power Output or remotely with a power supply (LA-205) near the radiator. If powering the radiator(s) with the transmitter, connect the transmitter Power Output to the radiator Power Input with CAT-5 cable.

NOTE: A maximum of two radiators can be powered by each LT-82. It is important not to exceed powering more than two radiators per transmitter or external power supply.

RF Signal on coaxial cable

LT-LTDesign-8282Guide

6Powering the LT-82

radiator power on CAT-5 cable

6A Plug the included power supply into the Power Input connection

Plug the included power supply into the Power Input connection on the rear panel of the transmitter, and then plug the power supply into an outlet.

ATTENTION: Do not connect the LT-82 power supply to an outlet until all other power connections within the system have been made. This helps to prevent power connection degradation.

6B Press the Power button

Press the Power button on the front panel of transmitter(s) to turn the unit(s) on.

RF Signal on coaxial cable

%HVXUHWRSOXJLQWR/7 before connecting to power outlet

radiator power on CAT-5 cable

TX power cable

39

Page 45
Image 45
Listen Technologies LR-42, LR-44 Connect LT-82 Power to Radiatorsif desired, Powering the LT-82, 6B Press the Power button