Listen Technologies LR-44, LR-42 Auto Shut-Off Feature, Powering down the unit, After 10 seconds

LR-42/44 Operating Instructions

7B Checking Current Channel

The channel the unit is currently on is represented by the corresponding LED in the channel indicator LEDs being lit (unless unit is in LED sleep mode). To check which channel the unit is on without changing the current channel while the unit is in LED sleep mode, press either the PWR or Select button once. This will turn the channel indicator LEDs back on for 10 seconds.

2 3 4

8Auto Shut-Off Feature

1 2 3 4

DesignLRLA-LT42/44--14082Guide

7KHUHFHLYHUZLOODXWRPDWLFDOO\WXUQRIILQWKHWZRIROORZLQJVLWXDWLRQV

1After 10 seconds

After 10 seconds if there is no headset plugged into the headset jack (LR-44 model only).

This allows for a quick battery status check without having to plug in a headset.

This function is also disabled while in Program Mode.

2After 30 minutes

After 30 minutes if no signal is detected by the receiver (both models).

9Powering down the unit

To power down the unit press and hold the PWR button for 1.5 seconds. All of the LEDs will light up momentarily and then turn off signaling power has been shut off.

1 2 3

1 2 3 4

100