Listen Technologies LR-44, LR-42 7Select Operating Channel, LT-82Setup and Operating Instructions

Design Guide DesignLTLT--8282Guide

LT-82 Setup and Operating Instructions

7Select Operating Channel

7A Select the operating channel

Select the operating channel (1-4). For single channel systems any channel can be used. In multi-channel systems each transmitter must be on a different channel.

'RZQ%XWWRQ

Channel select buttons

8S%XWWRQ

7B RF-Off Channel Setting Information

This channel does not have a carrier present however allows pass through from RF input to RF output. This allows a channel to be disabled in a daisy chain but allows the system to still operate as the RF signal from the transmitter(s) before it will still pass through. Note that the power (RJ-45 with CAT-5 connectors) will pass through in all conditions (unit off, channel -- or channels 1-4).

RF-Off Channel Setting

7C After channels have been selected, the transmitter(s) can be locked

After channels have been selected, the transmitter(s) can be locked on that channel by pressing and holding the Channel Select Up button for three seconds. When locked, a padlock icon will be displayed on the LCD (see below).

Icon indicates channel is locked

40