Trimble Outdoors Part Number 45005-00-ENG manual 0x8E-42, 0x8E-45, Production Parameters

Trimble Standard Interface Protocol A

0x8E-42

Command Packet 8E-42

Production Parameters

This packet is used to request the production parameters stored in nonvolatile memory. This packet contains only a single byte, the subpacket ID. The receiver returns packet 8F-42.

0x8E-45

Command Packet 8E-45

Revert Segments to Default Settings

This command packet reverts the parameters stored in a specific EEPROM segment (or all segments) to their factory default settings and reconfigures the ACE UTC GPS using those settings. The receiver returns packet 8F-45.

Table A-74 Command Packet 0x8E-45

Byte	Item	Type	Value	Segment Description
0	Subcode	BYTE	0x45
1	Segment	BYTE	2	Receiver configuration
	number		3	Packet I/O control
			4	Serial port configuration
			5	Timing output configuration
			6	Accurate position
			7	Self-survey configuration
			8	NMEA configuration
			11	UTC information
			0xFD	Segments 2 through 8
			0xFF	All segments

A-90 Acutime 2000 Synchronization Kit User Guide