Bosch Appliances VG4-100 Color Temperature, CTFID Configuration Tool for Imaging Devices

AutoDome Modular Camera System Glossary of CCTV Terms en 25

Color Temperature

A measure of the relative color of illumination. Most generally used to specify the automatic correction range of a color camera.

CTFID (Configuration Tool for Imaging Devices)

Bosch software used to configure and update cameras and other remote devices over video cable using Bilinx, and to save them for later use.

D

Day/Night (IR sensitive)

An AutoDome that has normal color operation in situations where there is sufficient illumination (day conditions), but where the sensitivity can be increased when there is little light available (night conditions). This is achieved by removing the infrared cut filter required for good color rendition. The sensitivity can be further enhanced by integrating a number of frames to increase the signal to the noise ratio of the camera.

Default Shutter

This feature allows the shutter speed to be set to a fast speed to eliminate motion blur and providing detailed and clear image of fast-moving objects while there is sufficient light. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to the standard setting to maintain sensitivity.

Digital Image Stabilization

See Image Stabilization.

DNR (Dynamic Noise Reduction)

A digital video processing technique that measures the noise (image artifacts) in the picture and automatically reduces it.

E

Ethernet

The most commonly used local area network (LAN) access method. Ethernet complies with the IEEE 802.3 standard. The Ethernet standard supports 10 Mbps, 100 Mbps and 1000 Mbps (Gigabit) data transmission rates.

EnviroDome

AutoDome with environmental protection that allows it to be used outdoors in almost any climate.

Bosch Security Systems, Inc. VG4-100 Series User’s Manual F01U028033 1.0 2006.08