PLANET IP PBX user’s manual

4.6SIP Trunk Configuration

A SIP trunk refers to a SIP account on a remote call routing or gateway device. A practical example is an account at an Internet Telephony Service Provider (ITSP) where a call is routed to a SIP client or off-ramped to an analog subscriber via PSTN. One could also build SIP trunk to a remote IP PBX to reach its extensions and PSTN ports.

The SIP TRUNK MANAGEMENT page allows the administrator to configure SIP trunks used by PLANET IP PBX. Select Trunk -> SIP Trunk, and one can add, edit, and delete SIP trunks. Go to Service -> IP PBX Service, and click RELOAD to activate changes.

 

 

 

 

 

1.

Click the Add New tab.

 

 

 

 

 

 

2.

Enter settings shown in

 

 

 

 

Add a SIP Trunk

 

3.

Table 4.6.

 

 

 

 

 

 

4.

Click ADD to see the newly added SIP trunk in the Trunk

 

 

 

 

 

 

 

Identifier.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

Click the Trunks tab, and More to see more information.

 

 

 

 

Edit a SIP Trunk

 

2.

Edit settings shown in

 

 

 

 

 

3.

Table 4.6 in a row.

 

 

 

 

 

 

 

 

 

 

 

 

4.

Click APPLY in the row to update the information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

Click the Trucks tab, and select a trunk identifier.

 

 

 

 

Delete a SIP Trunk

 

2.

Click DEL to remove the SIP trunk from the Trunk

 

 

 

 

 

 

 

Identifier.

 

 

 

 

 

 

 

 

 

 

Table 4.6 SIP Trunk Configuration Settings

 

 

 

 

 

 

 

Field

 

 

 

Description

 

Trunk Identifier

 

 

 

A unique number consisting of digits only. Usually give the

 

 

 

 

phone number issued by the ITSP for consistency.

 

 

 

 

 

 

 

 

 

Description

 

 

 

Arbitrary description information.

 

Dynamic Peer

 

 

 

Select if the trunk is a passive trunk which means the

 

 

 

 

 

 

 

 

 

 

Page 39
Image 39
Planet Technology IPX-1800N user manual SIP Trunk Configuration