Planet Technology IPX-1800N Terminal Trunk Configuration IPX-2000, IPX-1803 and IPX-1804 only

PLANET IP PBX user’s manual

4.8Terminal Trunk Configuration (IPX-2000, IPX-1803 and IPX-1804 only)

A SIP trunk terminal refers to a SIP account for a remote SIP trunk to register with. It terminates SIP registration and invitation from a remote IP PBX and relay calls to local clients, PSTN trunks, or further SIP trunks. In a site-to-site SIP trunking application, a SIP trunk on one side usually pairs with a trunk terminal on the other side to form a unidirectional call hand-off path. To allow trunking in the other direction, the two sides swap roles and form another pair. Since a terminal trunk is the account for a SIP trunk to authenticate with, exact the same identifier and password must be used for both.

The TERMINAL TRUNK MANAGEMENT page allows the administrator to configure trunk terminals used by PLANET IP PBX. Select Trunk -> Terminal Trunk, and one can add, edit and delete terminals. Go to Service -> IP PBX Service, and click RELOAD to activate changes.

	1.	Click the Add New tab.
Add a Terminal Trunk	2.	Enter settings shown in Table 4.8.
	3.	Click ADD to see the newly added terminal trunk in
		the Terminal Identifier.
	1.	Click the Trunks tab, and More to see more
		information.
Edit a Terminal Trunk	2.	Edit settings shown in Table 4.8 in a row.
	3.	Click APPLY in the row to update the information.
	1.	Click the Trunks tab, and select a terminal identifier.
Delete a Terminal Trunk	2.	Click DEL to remove the terminal trunk from the
		Terminal Identifier.

Table 4.8 Trunk Terminal Configuration Settings

Field Description

Terminal Identifier

A unique number consisting of digits only. This is the trunk identifier configured on the other IP PBX.

Description Arbitrary description information.