Planet Technology IPX-1800N Add a Device, Device Administration URL box, Edit a Device, DTMF mode

PLANET IP PBX user’s manual

		1.	Enter a device name in the Device ID box, and a URL in the
	Add a Device		Device Administration URL box.
		2.	Click ADD to see the newly added device in the Device ID.
		Once create the device, you can modify its information through the
		following steps.
		1.	Modify the Device Administration URL and click LINK as a
			shortcut to the device administration URL.
		2.	Click EDIT to see the Enable Automatic Client Configuration
			(ACC) page. Table 4.3.1 is a reference for detailed ACC
			settings which is used for auto-configuring IP phones. One can
	Edit a Device		specify the MAC address and audio preferences of the phone.
			Note that for phones using HTTP for auto-configuring, DHCP
			setting needs a new option 151 with a value of http://<IP PBX
			LAN IP>/tftpboot/ in the Code,Value box in Service ->DHCP
			Service. No extra settings needed if the phone uses TFTP for
			auto-configuring.
		3.	Click ENABLE to see Enable shows in the Auto Client Conf
			column. Click EDIT and then DISABLE to disable the function.
	Delete a Device	1.	Select a Device ID.
		2.	Click DEL to remove the device from the Device ID.
Table 4.3.1 ACC (Automatic Client Configuration) Settings
Field					Description
Device					A unique ID containing alphabets, numbers, and
					underscore only without spaces; 32 characters maximum.
Vendor Prefix					Ask your IP Phone vendor for the Prefix.
MAC Address					MAC address of the device.
Supplementary Configuration					Specify if provided by the phone.
Codec Preference					Preference order of supported codec and packet times of
					the phone.
					VAD is a technique that detects absence of audio and
Enable Voice Activity Detection				conserves bandwidth by preventing the transmission of
(VAD)					"silent packets" over the network.
					) Select if your IP Phone supports VAD.
DTMF mode					Choose a DTMF mode used by the phone