Planet Technology IPX-1800N user manual IP PBX Service, Reload, Configuration, Backup, Restore

PLANET IP PBX user’s manual

3.6IP PBX Service

In Service -> IP PBX Service, you can click the Service & Configuration tab to reload, backup, restore, restart or revert the IP PBX configuration, or click the Advance tab for the IP PBX parameters settings.

3.6.6Service & Configuration

Select Service ->IP PBX Service, and then click the Service & Configuration tab.

			Click RELOAD, and IP PBX will reload the configuration once
			there is no active call. If there is any active call, it will retain up
Reload	IP	PBX	to 3 minutes, and then IP PBX will reload. This is the most
Configuration			frequently used function in this page since any IP PBX
			configuration change has to be reloaded to take effect.
			Click BACKUP, and IP PBX archives and encrypts current
			configuration into a time-stamped backup file under tftpboot root
			directory. To secure configuration files, download them to a
Backup	IP	PBX	local host through the GET FILE function in Service -> TFTP
			Service once a while. Clear PBX Settings Only check box,
Configuration			both PBX and system (interfaces and services) settings will be
			archived in the backup file.
			Note: Do not change the configuration file name, or the
			RESTORE function will reject the configuration file.
Restore	IP	PBX	Click a configuration backup file in the list, click RESTORE, and
			IP PBX will restore the configuration as current setup. Go to
Configuration			Service ->IP PBX Service, and click RESTART to activate the