Planet Technology IPX-1800N Add a Route, Enter the IP Route ID , Subnet , Netmask , and Gateway

PLANET IP PBX user’s manual

Add a Route	1.	Enter the IP Route ID, Subnet, Netmask, and Gateway.
	2.	Click ADD to have the newly added route in IP Rout ID.
Edit a Route	1.	Edit the information in a row.
	2.	Click “APPLY” in the row to update the information.
Only Delete a Route	1.	Select a route ID.
	2.	Click DEL to remove the route ID from the IP Route ID
		column.

2.6Dynamic DNS Setup

Dynamic WAN IP address causes difficulty for inbound connections from remote clients or IP PBX systems. A popular work-around is to adopt domain names provided by Dynamic DNS service providers and run a client on or behind the gateway router (or IP PBX). It is required to apply an account and create a hostname in the account before configuration. Click Enable, give account information and refresh interval to activate a Dynamic DNS client. The client then uses Username and Password to access its account and update the Hostname with the latest WAN IP address at DynDNS or 3322.net Service in Interval seconds periodically.

	Typical hostname has a form of <hostname>.dyndns.org or
	<hostname>.3322.net. The refresh interval is usually between
	60 – 600 seconds depending on the volatility of WAN IP
Enable Dynamic DNS	assignment.
	1.	Click Enable.
	2.	Click DynDNS or 3322.net in the Service list.
	3.	Enter the Username, Password, Hostname, and
		Interval.
	4.	Click APPLY.
Disable Dynamic DNS	Click Disable, and then click APPLY.