Black Box AVSW-HDMI8X8-X, AVSW-HDMI-RX manual Operation 4.1 EDID Setup, Reset, Page

Chapter 4: Operation

4.Operation 4.1 EDID Setup

Table 4-1. EDID function setup for HDMI matrix switch: change the EDID setup.

Step
Number	Action	Result
Step 1	Press the EDID button.	The display will show the currently selected EDID mode.
Step 2	Press the SOURCE #1 or	The button will flash blue and the display will show the current Embedded EDID status.
	#2 button row
Step 3	Press the ENTER button	Set EDID mode. The switch will return to operation mode.

NOTE: Operation will abort if no keys are pressed within five seconds.

4.2 RESET

	Table 4-2. Reset function for HDMI matrix switch.
RESET	EDID return to factory default
	1. Reset to the factory default (1080p–2CH).
	2. Press the EDID button. The LCM will show the current EDID status.
	3. Press the RECALL button. The LCM will show the RESET EDID.

To Reset EDID mode:
Press EDID > RECALL > ENTER	4. Press the ENTER button to confirm the entries. The EDID will return to FSS mode and resolution 1080p-2CH.

Page 18 724-746-5500 blackbox.com