Yamaha RX-V563 owner manual 55 En, PRESET/TUNING/CH l/ h or 8PRESET/CH k/ n

Before performing the following operations, press

KSIRIUS.

■All Channel Search mode

1Press D SEARCH MODE (or MSRCH MODE) repeatedly to select “ALL CH

SEARCH”.

2Press G PRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to search for a channel within all channels.

y

•You can search for a channel quickly by pressing and holding

G PRESET/TUNING/CH l/ h (or 8PRESET/CH k/ n).

•You can skip channels to the previous or next category by pressing F CATEGORY (or 8A-E/CAT.l/ h).

■Category Search mode

1Press D SEARCH MODE (or MSRCH MODE) repeatedly to select “CAT SEARCH”.

2Press F CATEGORY (or 8A-E/CAT.l / h) repeatedly to change the channel category.

3Press G PRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to search for a channel within the selected channel category.

y

You can search for a channel quickly by pressing and holding

GPRESET/TUNING/CH l/ h(or 8PRESET/CH k/ n).

Note

This unit skips the channels when this unit is All Channel Search mode or Category Search mode in the following cases (it is not malfunction of this unit):

–the channel is locked (see page 56).

–the channel is out of service.

–you do not subscribe to the channel.

SIRIUS Satellite Radio™ tuning

■Preset Search mode

Prior to selecting a preset channel in the Preset Search mode, you must preset SIRIUS channels. For details, see “Setting the SIRIUS Satellite Radio™ preset channels” on page 56.

1Press D SEARCH MODE (or MSRCH MODE) repeatedly to select “PRESET

SEARCH”.

2Press F CATEGORY (or 8A-E/CAT.l / h) repeatedly to change the preset channel group (A to E).

3Press G PRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to change the preset channel number (1 to 8).

y

You can also select the preset channel number directly by pressing the numeric buttons (1 to 8) (G).

■Direct Number Access mode

1Press MSRCH MODE on the remote control repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”.

2Press the numeric buttons (G) to enter the desired three-digit channel number.

For example, to enter the number 123, press the numeric buttons (G) as shown below.

1 2 3

y

•To display the SIRIUS Radio ID (SID) number displayed in the front panel display, select channel “0”.

•To enter a one-digit or two-digit channel number, press the numeric buttons (G) on the remote control and then press TENT to confirm the input number.

•Instead of pressing TENT to tune into the channel immediately, you can wait a few seconds until this unit confirms the entered channel number.

•Pressing a button other than the numeric buttons (G) or TENT cancels the Direct Number Access mode procedure.

•If the selected channel is locked, “PIN:____” appears in the

front panel display. Enter the four-digit Parental Lock code number by using the numeric buttons (G) or press TENT to

cancel.

OPERATION BASIC

English

55 En