■SCENE IR code setting SCENE IR
Use this feature to output the remote control signals at the REMOTE OUT jack automatically when this unit is in the SCENE mode.
Choices: ON, OFF
•Select “ON” when the component connected to the REMOTE OUT jack is the Yamaha component and has the capability of the SCENE control signals. This unit automatically sends the remote control signals to the component.
•Select “OFF” when the component connected to the REMOTE OUT jack is not the Yamaha component and does not have the capability of the SCENE control signals.
Note
If noises are output when you operate the SCENE function, set “SCENE IR” to “OFF”.
■Tuner frequency step TU
(Asia and General models only)
Use this feature to set the tuner frequency step according to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
•Select “AM10/FM100” for North, Central and South America.
•Select “AM9/FM50” for all other areas.
■Initializing INIT.
Use this feature to reset all the parameters of this unit to the initial factory settings (see page 93).
Choices: CANCEL, RESET
•Select “CANCEL” not to reset any parameters of this unit.
•Select “RESET” to reset the parameters of this unit.
Notes
•This setting completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup menu parameters will not be initialized.
•The initial factory settings are activated next time you turn on this unit.
Advanced setup
OPERATION | ADVANCED |
|
|
English
