Crossover CROSSOVER
Use this feature to select the crossover frequency of all the speakers set to “SML” (or “SMALL”) in “SPEAKER SET” (see page 65). All frequencies below the selected frequency will be sent to the subwoofer or front speakers depending on the setting of “LFE/BASS OUT” in “SPEAKER SET” (see page 65).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz
1 SOUND MENU
A)SPEAKER SET
CROSSOVER
SET MENU
■Speaker level B)SP LEVEL
Use this feature to manually adjust the output level of each speaker.
Control range:
Control step: 1 dB
Initial setting: 0 dB
1 SOUND MENU |
| 1 SOUND MENU |
|
B)SP LEVEL | 1/2 | B)SP LEVEL | 2/2 |
|
| ||
. FR.L |
| .SUR.L |
|
FR.R |
| SUR.R |
|
CNTR |
| SBL |
|
SWFR |
| SBR |
|
FREQ;;;80Hz
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
1 SOUND MENU
A)SPEAKER SET
SUBWOOFER PHASE
>NORMAL REVERSE
•Select “NORMAL” if you do not want to reverse the phase of your subwoofer.
•Select “REVERSE” to reverse the phase of your subwoofer.
SP LEVEL | Adjusted speaker |
FR.L | Front left speaker |
|
|
FR.R | Front right speaker |
|
|
CNTR | Center speaker |
|
|
SWFR | Subwoofer |
|
|
SUR.L | Surround left speaker |
|
|
SUR.R | Surround right speaker |
|
|
SBL | Surround back left speaker |
|
|
SBR | Surround back right speaker |
|
|
Notes
•The available speaker channels differ depending on the setting of the speakers.
•Instead of “SBL” and “SBR”, “SUR.B” is displayed if “SUR.B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 66).
OPERATION | ADVANCED |
|
|
English
