Yamaha RX-V563 owner manual 90 En, Before Auto Setup, During Auto Setup

Troubleshooting

■AUTO SETUP

Before AUTO SETUP

Error message	Cause	Remedy	See
			page
Connect MIC!	Optimizer microphone is not connected.	Connect the supplied optimizer microphone
		to the OPTIMIZER MIC jack on the front	26
		panel.
Unplug HP!	Headphones are connected.	Unplug the headphones.	—
During AUTO SETUP
Error message	Cause	Remedy	See
			page
E-1:NO FRONT SP	Front L/R channel signals are not detected.	Check the front L/R speaker connections.	11
E-2:NO SUR.SP	A surround channel signal is not detected.	Check the surround speaker connections.	11
E-3:SBR->SBL	Only a right surround back channel signal is	Connect the surround back speaker to the	11
	detected.	LEFT SURROUND BACK SPEAKERS
		terminal if you only have one surround
		back speaker.

E-4:NOISY Background noise is too loud.

Try running “AUTO SETUP” in a quiet	—
environment.
Turn off noisy electric equipment like air	—
conditioners or move them away from the
optimizer microphone.

E-5:CHECK SUR.	Surround back speakers are connected,	Connect surround speakers when you use	11
	though surround L/R speakers are not.	surround back speakers.
E-6:NO MIC	The optimizer microphone was unplugged	Connect the supplied optimizer microphone	26
	during the “AUTO SETUP” procedure.	to OPTIMIZER MIC jack on the front
		panel.
E-7:NO SIGNAL	The optimizer microphone does not detect	Check the microphone setting.	26
	test tones.
		Check the speaker connections and	10, 11,
		placement.	26
E-8:USER CANCEL	The “AUTO SETUP” procedure was	Run “AUTO SETUP” again.	26
	cancelled due to user activity.
E-9:INTERNAL ERROR	An internal error occurred.	Run “AUTO SETUP” again.	26

90 En