Samsung DVD-C700 manual Controlling a TV with the Remote, Troubleshooting Guide, Code Brand

Controlling a TV with the Remote

The remote can also be set up to control most TVs. To program the remote, use the code that corresponds to your brand.

	1.Turn on the TV.
1	2.Point the DVD’s remote at the TV.
3		While holding the TV POWER button down,
	3.
		enter the code for your brand.
			TV Codes
		CODE	BRAND	CODE	BRAND
		0	SAMSUNG A	OPEN/CLOSE	MITSUBISHI
		1	SHARP B	AUDIO	SAMSUNG B
		2	SONY	SUB TITLE	SAMSUNG C
		3	MAGNAVOX	DVD POWER	SHARP A
		4	SANYO A	ANGLE	ZENITH
		5	LG B	TOP MENU	LG C
		6	RCA	MENU	DAEWOO
		7	LG A	RETURN	SANYO B
		8	TOSHIBA	REV SEARCH	EMERSON
		9	HITACHI	REPEAT	SHARP C
		SETUP	JVC	FWD SEARCH	SAMSUNG D
		DISPLAY	PANASONIC A	BACK SKIP	PANASONIC B

e.g For Samsung A TVs

While holding down the TV button, enter 0.

4.If the TV turns off, setup is complete.

Enter other codes of the same brand if the first code does not work.

5.To operate the TV, use the “TV Function Buttons” described on page 13.

NOTE The remote may not be able to control every model TV of the brands listed.

Troubleshooting Guide

Proper function of your DVD player is mostly dependent on the discs you play. When some of the functions indicated in the I/B do not work properly, it is highly probable that the disc is responsible. We strongly recommend you review the instruction book before you start using the player. For your convenience, we have enlisted some tips to help solve problems you might encounter while using the DVD player.

However, if the same problem occurs repeatedly, please contact your nearest service center.

	Problem		Action	I/B
		• Check the batteries in the remote. May need replacing.
No operations can be		•	Operate the remote control at a distance of no more than 20 feet.
		•	Remove batteries and hold down one or more buttons for several min-	P 13
performed with remote.
			utes to drain the microprocessor inside the remote to reset it. Reinstall
			batteries and try remote again.
		•	Ensure that the disc is installed with the label side facing up.
Disc does not play		•	Check the region number of the DVD.	P 7, 17, 18
		• This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a
			DVD, a VIDEO-CD or a CD.
		•	5.1 channel sound is reproduced only when the following conditions
			are met. : 1)The DVD player is connected with the proper amplifier
5.1 channel sound is not			2)The disc is recorded with 5.1 channel sound.	P 7, 15,
being reproduced.		•	Check whether the disc being played has the “Dolby 5.1 ch” mark on	35, 36
			the outside.
		•	Check if your audio system is connected and working properly.
		•	The features or action cannot be completed at this time because:
			1. The DVD’s software restricts it.
The	icon appears on		2. The DVD’s software doesn’t support the feature (e.g., angles).	P 13,
screen.			3. The feature is not available at the moment.	P 21 ~ 30
			4. You’ve requested a title or chapter number or search time that is out
			of range.
Disc Menu doesn’t appear.		•	Check if the disc has a Menu.	P 26, 27
Playback mode differs		•	Some of the functions selected in the Setup Menu may not work prop-
from the Setup Menu				P 31 ~ 37
			erly if the disc is not encoded with the corresponding function.
selection
The screen ratio cannot be		•	The Screen Ratio is fixed on your DVDs.	P 37
changed.
No audio		•	Make sure you have selected the correct Digital Output in the Audio	P 36
			Options Menu.
		• With the power on, press and hold the STOP and PLAY/PAUSE button
Forgot parental level			on the player. This resets the password feature and all other settings to	P34
			the initial factory settings. You may be required to select a menu lan-
			guage.
		•	Go to the contents and find the section of the instruction book that
If you experience other			contains the explanations regarding the current problem, and follow the
			procedure once again.
problems.
		•	If the problem still cannot be solved, please contact your nearest
			authorized service center or call 1-800-SAMSUNG.

REFERENCE

38 39