Yamaha RX-V563 owner manual 81 En, Controlling Zone 2 with the remote control

Operate the following operations after activating the Zone 2 operation mode.

Operating Zone 2

Press R INPUT l/ hto select the desired input source while the ZONE2 indicator is flashing in the front panel display.

•Select “TUNER” as the input source to use the TUNER features in Zone 2. For details about the TUNER operations, see “FM/AM tuning” on page 45.

•Select “XM” as the input source to use the XM Satellite Radio features in Zone 2. For details about the XM Satellite Radio operations, see “XM Satellite Radio tuning” on page 48.

•Select “SIRIUS” as the input source to use the SIRIUS Satellite Radio features in Zone 2. For details about the SIRIUS Satellite Radio operations, see “SIRIUS Satellite Radio™ tuning” on page 53.

•Select “V-AUX” as the input source to use iPod features in Zone 2. For details about the iPod operations, see “Using iPod™” on page 59.

•Select “V-AUX” as the input source to use Bluetooth component features in Zone 2. For details about the Bluetooth component operations, see “Using Bluetooth™ components” on page 61.

Set Zone 2 to the standby mode

Press 8ZONE 2 ON/OFF to set Zone 2 to the standby mode.

y

Press C SYSTEM OFF to set the main zone and Zone 2 to the standby mode simultaneously.

Using multi-zone configuration

■Controlling Zone 2 with the remote control

Turning on Zone 2

While pressing and holding 5AMP, press

HPOWER.

While holding

down

AMP POWER

Operating Zone 2

While pressing and holding 5AMP, press one of the input selector buttons (4) to select the desired input source of Zone 2.

Setting Zone 2 to the standby mode

While pressing and holding 5AMP, press ISTANDBY to set ZONE 2 to the standby

mode.

OPERATION ADVANCED

English

81 En