Yamaha RX-V563 owner manual 80 En, Controlling Zone 2 with the front panel

Using multi-zone configuration

Controlling Zone 2

You can select and control Zone 2 by using the control buttons on the front panel or on the remote control. The available operations are as follows:

•Selecting the input source of Zone 2.

•Tuning into FM or AM when “TUNER” is selected as the input source of Zone 2 (see page 45).

•Tuning into XM Satellite Radio when “XM” is selected as the input source of Zone 2 (see page 48) (U.S.A. and Canada models only).

•Tuning into SIRIUS Satellite Radio when “SIRIUS” is selected as the input source of Zone 2 (see page 53) (U.S.A. and Canada models only).

•Enjoying music stored on your iPod stationed in a Yamaha iPod universal dock (such as YDS-10 sold separately) connected to the DOCK terminal of this unit when “V-AUX” is selected as the input source (see page 59).

•Enjoying music stored on your Bluetooth component being performed “paring” operation with a Yamaha Bluetooth adapter (such as YBA-10 sold separately) connected to the DOCK terminal of this unit when “V- AUX” is selected as the input source

(see page 61).

Note

You must complete each step while the ZONE2 indicator is flashing in the front panel display. Otherwise, the Zone 2 mode is automatically canceled and this unit returns to the normal operation mode. In this case, repeat the Zone 2 selection procedure.

■Controlling Zone 2 with the front panel

Turning on Zone 2

Press K ZONE CONTROL to turn on Zone 2.

Activating the Zone 2 operation mode

Press K ZONE CONTROL to control Zone 2.

The ZONE2 indicator flashes in the front panel display for approximately 10 seconds.

ZONE2

Flashes

80 En