Lexmark C748x, 41G0100, 41H0000, 41G0050, C746x manual Setup menu, Understanding printer menus 173

Understanding printer menus		173
	Use	To
	Separator Sheet Source	Specify the paper source for separator sheets.
	Tray [x]	Notes:
	Manual Feeder
		• Tray 1 (standard tray) is the factory default setting.
		• From the Paper menu, Configure MP must be set to Cassette in order for
		Manual Feeder to appear as a menu setting.
	Blank Pages	Specify whether blank pages are inserted in a print job.
	Do Not Print	Note: Do Not Print is the factory default setting.
	Print
Setup menu
	Use		To
	Printer Language		Set the default printer language.
	PS Emulation		Notes:
	PCL Emulation
			• PS Emulation is the factory default printer language. PS
			emulation uses a PS interpreter for processing print jobs.
			• PCL Emulation uses a PCL interpreter for processing print
			jobs.
			• Setting a printer language as the default does not prevent a
			software program from sending print jobs that use another
			printer language.
	Job Waiting		Specify if print jobs are removed from the print queue when they
	On		require unavailable printer options or custom settings. These print
	Off		jobs are stored in a separate print queue, so other jobs print
			normally. When the missing information or options are obtained,
			the stored jobs print.
			Notes:
			• Off is the factory default setting.
			• This menu item appears only when a non-read‑only printer
			hard disk is installed. This requirement ensures that stored
			jobs are not deleted if the printer loses power.
	Print Area		Set the logical and physical printable area.
	Normal		Notes:

Whole Page

•Normal is the factory default setting. When attempting to print data in the non‑printable area defined by the Normal setting, the printer clips the image at the boundary.

•Whole Page allows images to be moved into the

non‑printable area defined by the Normal setting, but the printer clips the image at the Normal setting boundary. This setting affects only pages printed using a PCL 5e interpreter. This setting has no effect on pages printed using the PCL XL or PostScript interpreter.