Lexmark C746x, 41G0100, 41H0000, 41G0050, C748x manual Understanding printer menus 169

Understanding printer menus	169
Use	To
Timeouts	Specify the number of minutes of inactivity before some systems
Sleep Mode	begin entering a minimum power state.
Disabled	Notes:
1–180	• 30 minutes is the factory default setting.
	• A lower setting conserves more energy, but may require
	longer warm‑up times.
	• Select the lowest setting if the printer shares an electrical
	circuit with room lighting.
	• Select a high setting if the printer is in constant use. Under
	most circumstances, this keeps the printer ready to print
	with minimum warm‑up time.
	• Sleep Mode does not interact with Standby Mode.
Timeouts	Set the amount of time (in seconds) the printer waits before
Screen Timeout	returning to a ready state.
15–300	Note: 30 seconds is the factory default setting.
Timeouts	Set the amount of time (in seconds) the printer waits to receive
Print Timeout	an end‑of‑job message before canceling the remainder of the
Disabled	print job.
1–255	Notes:
	• 90 seconds is the factory default setting.
	• When the timer expires, any partially printed page still in
	the printer is printed, and then the printer checks to see if
	any new print jobs are waiting.
	• Print Timeout is available only when using PCL emulation.
	This setting has no effect on PostScript emulation print
	jobs.
Timeouts	Set the amount of time (in seconds) the printer waits for
Wait Timeout	additional data before canceling a print job
Disabled	Notes:
15–65535	• 40 seconds is the factory default setting.
	• Wait Timeout is available only when the printer is using
	PostScript emulation. This setting has no effect on PCL
	emulation print jobs.
Timeouts	Set the amount of time (in seconds) the printer waits for user
Job Hold Timeout	intervention before it holds jobs that require unavailable
5–255	resources and continues to process other jobs in the print queue.
	Notes:

•30 seconds is the factory default setting.

•This menu appears only when a printer hard disk is installed.

1This menu appears only in non‑touch‑screen printer models.

2This menu appears only in touch‑screen printer models.