Lexmark C746x, 41G0100, 41H0000, 41G0050 manual Saving energy, Using Eco‑mode, Reducing printer noise

Using C746x 74

Checking the status of parts and supplies from the Embedded Web Server

Note: Make sure the computer and printer are connected to the same network.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Device Status > More Details.

Saving energy

Using Eco‑mode

Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact.

1From the printer control panel, navigate to:

> Settings > Settings > > General Settings > > Eco‑Mode > > select the setting you want

Use	To
Off	Use the factory default settings for all settings associated with Eco‑Mode. This setting supports the
	performance specifications for your printer.
Energy	Reduce energy use, especially when the printer is idle.

•Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.

•The printer enters Sleep mode after one minute of inactivity.

Energy/Paper	Use all the settings associated with Energy and Paper modes.
Plain Paper	•	Enable the automatic two‑sided (duplex) feature.
	•	Turn off print log features.

2Press .

Reducing printer noise

Use Quiet Mode to reduce the printer noise.

1From the printer control panel, navigate to:

> Settings > Settings > > General Settings > > Quiet Mode > > select a setting you want