Reports menu, Universal Setup menu | Lexmark 41H0000, 41G0100, C748x

Understanding printer menus

	Use	To

	Units of Measure	Specify the unit of measure.
	Inches	Note: Inches is the US factory default setting. Millimeters is the
	Millimeters	international factory default setting.

	Portrait Width	Set the width for a portrait page orientation.
	3–48 inches	Notes:
	76–1219 mm	Notes:
	76–1219 mm	• 8.5 inches is the US factory default setting. 216 mm is the

		international factory default setting.
		• If the specified width exceeds the maximum, then the printer uses
		the maximum width allowed.
		• The width can be increased in 0.01-inch or in 1-mm increments.

	Portrait Height	Set the height for a portrait page orientation.
	3–48 inches	Notes:
	76–1219 mm	Notes:
	76–1219 mm	• 14 inches is the US factory default setting. 356 mm is the

		international factory default setting.
		• If the specified height exceeds the maximum, then the printer uses
		the maximum height allowed.
		• The height can be increased in 0.01-inch or in 1-mm increments.

	Feed Direction	Specify the feed direction.
	Short Edge	Notes:
		Notes:

Long Edge

•Short Edge is the factory default setting.

•Long Edge appears only when the paper or specialty media can be loaded in either direction.

	Use	To

	Menu Settings Page	Print a report containing information about the paper loaded in trays, installed
		memory, total page count, alarms, timeouts, printer control panel language,
		TCP/IP address, status of supplies, status of the network connection, and other
		information.

	Device Statistics	Print a report containing printer statistics such as supply information and details
		about printed pages.

	Network Setup Page	Print a report containing information about the network printer settings, such as
		the TCP/IP address information.
		Note: This menu item appears only in network printers or in printers connected
		to print servers.